Liaison Caméra Fibre

StudioBridge 10G PWR

The Blackmagic StudioBridge 10G PWR is designed to bridge low-cost single link 10G Ethernet SMPTE-2110 connections into high-end redundant 100G Ethernet based systems. It converts and combines 8 channels of 10G Ethernet into a redundant pair of 100G Ethernet connections. That means you can plug in 8 separate 10G Ethernet Ultra HD devices. Each 10G Ethernet port has a massive 90W of PoE++ power, so you can power equipment such as converters and cameras directly from their Ethernet connections!

StudioBridge 100G

The Blackmagic StudioBridge 100G bridges a single 100G Ethernet SMPTE-2110 connection into a redundant dual 100G Ethernet broadcast system. It also has two 100G Ethernet camera connections that can be combined if total bandwidth doesn't exceed 100 Gb/s! This lets you interface two cameras such as the URSA Cine 12K 100G into a redundant broadcast system. It also includes a separate 10G Ethernet channel for accessories, an NMOS control port, and dual redundant power supplies.

ATEM Camera Converter 

Get everything you need for cameras in live production with a single converter! Connect your camera’s SDI or HDMI outputs for conversion to optical fiber, while your switcher program feed can be fed back via optical fiber for camera monitoring. ATEM Camera Converter includes an internal battery, talkback, tally, and microphone inputs!

Studio Fiber Rack Kit

The Blackmagic Design Studio Fiber Rack Kit allows you to install either one or two Studio Fiber Converter boxes in 2 RU of standard 19" equipment rack space.

Studio Fiber Converter :

Use your cameras from a studio or a box office via SMPTE optical fiber, for a maximum distance of 2 km. The video, audio and SDI control signals from the camera are converted by the Blackmagic Studio fiber converter and routed via a single fiber-optic cable to a Blackmagic camera converter, connected to the remote camera. Video and data are transmitted using a standard IP protocol, providing very low latency, high quality broadcast video. You have 12G-SDI technology for streaming HD or Ultra HD cameras and 3 independent return channels, standard connections for controlling cameras, PTZ, two channels for control network intercoms, a connection monitoring for the control network, a countdown and a 6 inch LCD screen to monitor cameras and return channels. The Blackmagic Studio fiber converter also allows you to power your remote cameras and their accessories.

Camera Fiber Converter :

The Blackmagic Optical Fiber Converter allows you to connect and power your URSA Broadcast Camera up to 2 km via standard SMPTE fiber optic cable. It also includes live camera control commands, multiple network channels and headphone jacks. The Blackmagic Camera Fiber Converter offers a stream of Ultra HD, 3-way HD return cameras, all in a compact package that supports video over IP.

ATEM Studio Converter and ATEM Camera Converter work perfectly together. Connect up to four ATEM camera converters via over 45 km of fiber optic cable to route bidirectional video, pointing and network controls. Connect the program output of the ATEM mixer to ATEM Studio Converter for distribution to the four camera converters. You can also use multiple cascaded Studio Converters when more than 4 cameras are used.
Optical fiber SFP module sold separately.