Energie

Power Supply - ATEM Mini Extreme G2 120W

Alimentation 120 W pour ATEM Mini Extreme G2.

Power Supply - URSA/Studio Cam Pro 12V100W

The Blackmagic Design URSA power supply is a power supply unit with a built-in XLR cable. It features a free port designed to accommodate an IEC cable (sold separately).

Power Supply - Pocket Camera 4K 12V30W

This 12V power supply from Blackmagic Design is a 12V DC mains adapter featuring a 2-pin locking connector designed for the Pocket Cinema Camera 4K. It delivers up to 30W of power and comes with a set of three international plug adapters.

Power Supply - Converters 12V12W Locking

Power your ATEM Mini, ATEM Camera Converter, Mini Converters and MultiView 4 HD with this 12V 12W locking power supply from Blackmagic Design.

Power Supply - Converters 12V10W

The PSUPPLY-INT12V10W from Blackmagic Design is a replacement power supply compatible with all models in the Mini Converter range as well as the HyperDeck Shuttle. Just like the original model, this power supply comes with plug adaptors for different countries and also includes a cable clamp to prevent the cable from becoming accidentally disconnected.

Power Supply - Micro Converter 5V10W USBC

The Blackmagic Design power supply for Micro Converters features a USB Type-C connector for the Micro Converters and a two-pin mains plug at the other end. It also comes with a range of international plug adaptors so you can use it when travelling.

Power Supply - DaVinci/ATEM 12V70W

This power supply for DaVinci control surfaces and ATEM switchers (12 V / 70 W) from Blackmagic Design serves as a replacement part or backup power supply for the following products: ATEM 1 M/E Production Switcher, ATEM 2 M/E Production Switcher, ATEM 1 M/E Broadcast Control Panel and DaVinci Resolve Control Surface.

Power Supply - ATEM Mini Extreme 12V60W

Power your ATEM Mini Extreme mixer from the mains using this Blackmagic Design power supply. This mains adapter supplies 12 V DC, 60 W to the ATEM Mini Extreme via its lockable cylindrical connector.

Power Supply - PYXIS 6K 12V60W

This Blackmagic Design power adapter is a 12 V DC mains adapter featuring a 2-pin locking connector, designed for the PYXIS 6K cinema camera. It delivers a maximum power output of 60 W.

Power Supply - Video Assist 12G

Power your Video Assist 12G monitor from the mains using this international mains adapter from Blackmagic Design. This mains adapter supplies 12 V DC, 36 W to the Video Assist 12G monitor via its lockable cylindrical connector. The adapter features a US mains plug and comes with a set of three international plug adapters.

Power Supply - UltraStudio 12V30W

This is a replacement 12V power supply compatible with certain Blackmagic Design products, including the HyperDeck Studio recorder, UltraStudio Pro, 3D capture and playback devices, the ATEM Studio Converter, the Blackmagic Cinema Camera 2.5K (EF/MFT models), SmartView Duo and HD monitors, the ATEM Television Studio production switcher, the SmartScope Duo 4K and the Blackmagic Production Camera 4K. It includes international mains plug adapters for use worldwide.

Power Supply - Video Assist

Compatible with all versions of Blackmagic Design’s 5" Video Assist recorder/monitor, this 12 V power supply supports an input voltage of 110–240 V (international standards) and comes with four interchangeable mains adapters: one for the US and three for international use.

Power Supply - Videohub 12V150W

The PSUPPLY-12V12A from Blackmagic Design is a replacement power supply for the Broadcast Videohub router.

Power Supply - Pocket Camera 12V10W

The Blackmagic Design Pocket Cinema Camera power supply is used both to power the camera from the mains and to recharge the camera’s built-in battery. It supplies 12 V DC and is fitted with a 0.7 mm DC jack specifically designed for the Pocket Cinema Camera. Charging a battery takes approximately one hour and fifteen minutes when the camera is switched off, and approximately two hours when it is switched on.

LP-E6 Battery

Order Code: BATT-LPE6M/CAM
LP-E6 compatible Lithium-Ion rechargeable battery. For use with Blackmagic Micro cameras and Blackmagic Pocket Cinema Camera.

BlackmagicURSA Cine 24V 250W

Power supply with 8 pin locking connector for the 24V DC power connector on Blackmagic URSA Cine’s rear panel. Requires IEC C13 cable.

NP-F570 Battery

Order Code: BATT-NPF570/CAM
3,350 mAh NP-F570 compatible lithium-Ion rechargeable battery compatible with Blackmagic Pocket Camera Battery Grip.

Dual bay battery charger can be used with the following battery ranges :

• Compatibility: AG-VBR (AG-VBR118, AG-VBR89, AG-VBR59)
• Energy consumption: 36 W
• Load current: Max. 4000 mA

Battery for the 4K handheld camcorder AG-DVX200 and HD handheld camcorder AJ-PX270 : 

• Battery capacity: 11,800 mAh
• Voltage: 7.28V
• Compatibility: AG-DVX200 / AJ-PX230 / AJ-PX270 / AG-UX90 / AG-UX180 / AU-EVA1 / AG-UMR20 / AG-CX350

Battery for the 4K handheld camcorder AG-DVX200 and HD handheld camcorder AJ-PX270 :

• Battery capacity: 8850 mAh
• Rated capacity: 65 Wh
• Voltage: 7.28V
• Compatibility: AG-DVX200 / AJ-PX230 / AJ-PX270 / AG-AC30 / AG-UX90 / AG-UX180 / AU-EVA1 / AG-UMR20 / AG-CX350

Rechargeable battery for Panasonic camcorder :

• Battery capacity : 5900 mAh
• Rated capacity: 43 Wh
• Voltage: 7.28 V
• Weight: 230g
• Compatibility: AG-DVX200 / AJ-PX230 / AJ-PX270 / AG-AC30 / AG-UX90 / AU-EVA1 / AG-UMR20 / AG-UX180 / AG-CX350